There are a variety of outdoor garden water fountains to choose from, allowing you to choose one that suits your yard perfectly. To enhance the element of style and charm to your backyard, garden, or patio, installing an outdoor fountain is one of the best options you can make.
The fountains can be decorated with a sculpture or recognizable figurine as a part of the design that gives them a more pleasing appearance. You will usually be able to pick the size of outdoor fountains based on what suits your personal tastes.
However, in the absence of proper care, it’ll lose its appeal and aesthetics. It is best to keep in mind the importance of broken fountain repair. Wind, rain, dirt, and debris can damage them if they are not maintained and cared for properly.
Contents
Can You Repair a Cracked Fountain?
In maintaining your outdoor water fountain, cracks and damages are a significant concern. Now, you may wonder if it is possible to repair a cracked fountain—the answer is yes!
There is a possibility that these fountains can chip or crack over time due to the weather and other elements. As long as you catch cracks in fountains before they become a serious problem, most can be repaired.
When performing a fountain repair, it is important to ensure that the material used is compatible with the fountain’s—epoxy-based patching materials work best with concrete fountains, while waterproof silicone sealant or similar fillers work on metal or fiberglass fountains.
Tips on How to Clean Your Outdoor Water Fountain
In comparison with an indoor fountain, keeping an outdoor fountain clean can be challenging. Outdoor fountains are exposed to the wind, leaves, dirt, animals, rain, snow, and raindrops, depending on their climate. Indoor fountains tend to gather dust and fingerprints.
In general, cleaning a smaller fountain will take less time, unless there are many intricate parts to take care of. Larger fountains, on the other hand, are able to hold more water and therefore have more space for deposits to accumulate.
Empty the Fountain of Water
It will be necessary to drain all the water from the fountain basin. The first step to draining a fountain is to read the maintenance instructions and learn how to disassemble the pump as well as which chemicals to use.
It is crucial to unplug the pump before draining your water fountain to prevent burnout or wearing down.
Depending on the size of the fountain basin, you can scoop the water out using a pail or pitcher. Remove any debris to avoid clogging the pump. As an alternative, you can always siphon the water from the container with a hose, or use a wet & dry vacuum to completely empty the fountain basin.
Clean the Water Fountain Pump Thoroughly
In order to keep the fountain pump free of debris and obstructions, it is important that the pump is cleaned every three months. For more information about how to detach your pump, please refer to your owner’s manual.
Remove any debris or buildup from the pump with a cloth to make sure it is thoroughly clean. Wash the inside of the pump by opening the cover and wiping it down. Using an old toothbrush, you can clean out hard-to-reach places.
It is very important to rinse your pump off to remove any soap that might be left on it and to avoid using chemicals that have not been approved by the manufacturer. Rinsing your pump off completely after washing can prevent it from being ruined by soap within a day. You will need no replacement pump for a long time if you perform regular pump maintenance.
Scrub Clean Your Outdoor Water Fountain
Water fountains can be cleaned with soapy water depending on how often they are maintained. Algae removal products are needed if there is extensive algae growth. Algae growth is more prevalent in fountains located in the sun than those situated in the shade.
Cleaning your fountain with a non-abrasive tool is always recommended, no matter what the material is. It is a good idea to buy a dedicated cleaning solution for water features or to fill a bucket with warm water mixed with a little mild dish soap.
Use rubber gloves when scrubbing the inside and outside of your water feature with a cloth, or a non-abrasive brush if dealing with tough stains. When it comes to cleaning small nooks and crannies around the house, an old toothbrush can come in very handy.
Maintaining the appearance of your fountain is as easy as wiping it down every four to six months to prevent a buildup of dirt and debris. It is also a good idea to take a deeper look every few months. Make sure you use a mild cleanser and a non-abrasive brush to clean the bowl.
Rinse Clean Your Outdoor Water Fountain
The fountain’s walls should now be rinsed to remove any chemicals. You don’t want any cleaning solution left behind since you are likely to attract birds, butterflies, and dragonflies. Wildlife and your pets may occasionally help themselves to your water feature if it sits low to the ground.
Inspect the basin of your fountain to ensure that all stains have been removed. Algae can come back quickly so you need to be sure that you have completely removed any algae from your fountain during this process.
You may also want to consider adding an animal-friendly water treatment product to your water fountains when refilling them with water. This will help reduce algae growth.
Hire Professional Pond Repair Service for Your Needs
In the event that you do not have the time or resources to ensure that your water fountain is cleaned, maintained, and repaired, it is still recommended to hire a professional to do the task.
You can rest assured that we will take care of all of your outdoor fountain repair and cleaning needs in an efficient manner while doing it the right way.
Get a free quote from us and to learn more about our services, contact us at 949-653-2305 at OC Pond Service today!
